Computer Numerical Control
Short Description:
Material: Aluminum alloy 6061T6
Surface treatment: sandblasting 150# bright silver oxidation (according to customer demand for surface treatment, can do sandblasting or non-sandblasting oxidation and hard oxidation, acid baking paint treatment, oil spraying treatment, electroplating, chemical nickel plating, passivation, etc.)
Processing method: four-axis CNC machining center
Tolerance range: bearing circumference within 0.005mm, bearing spacing within 0.01mm, bearing assembly requirements temperature difference after assembly without loosening process.
CNC machining finish：Ra1.6
Application areas: crawling robot body, motor cabin body, main board of token balance car, pipeline inspection equipment shell, industrial crawling equipment head shell, laser equipment shell, optical base plate, robot vision shell, robot arm, etc.
Description：The parts of this product are relatively large, and the four-axis processing method is used. One clamping can complete the multi-surface cavity, the equipment repeat positioning accuracy 0.002mm, reducing the error or bad caused by manual secondary clamping.
The monthly output of this product is 1000 pieces with 99% yield rate.
Material: Aluminum alloy 6061T6
Surface treatment: sandblasting 150# bright silver oxidation (according to customer demand for surface treatment, can do sandblasting or non-sandblasting oxidation and hard oxidation, acid baking paint treatment, oil spraying treatment, electroplating, chemical nickel plating, passivation, etc.)
Processing method: four-axis CNC machining center
Tolerance range: bearing circumference within 0.005mm, bearing spacing within 0.01mm, bearing assembly requirements temperature difference after assembly without loosening process.
CNC machining finish：Ra1.6
Application areas: crawling robot body, motor cabin body, main board of token balance car, pipeline inspection equipment shell, industrial crawling equipment head shell, laser equipment shell, optical base plate, robot vision shell, robot arm, etc.
Description：The parts of this product are relatively large, and the four-axis processing method is used. One clamping can complete the multi-surface cavity, the equipment repeat positioning accuracy 0.002mm, reducing the error or bad caused by manual secondary clamping.
The monthly output of this product is 1000 pieces with 99% yield rate.
